Who's going to polish their truck?

[ldjessee]

Might have to drag some photos of the CyberTruck into Photoshop and give some ideas down for different wraps...

Of course would have to do some standard geeky/nerdy ones (back to the future, Star Wars, Star Trek, etc).

Now, if they make some of those that you can have output light, I think you could do a CyberTruck up to look very much like it came from Tron.

Advertisement

 

[Dids]

Might have to drag some photos of the CyberTruck into Photoshop and give some ideas down for different wraps...

Of course would have to do some standard geeky/nerdy ones (back to the future, Star Wars, Star Trek, etc).

Now, if they make some of those that you can have output light, I think you could do a CyberTruck up to look very much like it came from Tron.

Electroluminescent plastic.
http://www.electroluminescent-provider.com/install-sticker/

 

[Ehninger1212]

Electroluminescent plastic.
http://www.electroluminescent-provider.com/install-sticker/

 

[TyPope]

Electroluminescent plastic.
http://www.electroluminescent-provider.com/install-sticker/

LumiLor

 

[Ehninger1212]

LumiLor

Yep! its sweet stuff! Surprisingly easy to use if you already know automotive paint.

 

[hridge2020]

Can we get some information on the processing/finishing of the Stainless Steel material? DIN/ASTM requirements being done to the material?
Deutsches Institut für Normung e.V. (DIN; in English, the German Institute for Standardization) Society for Testing and Materials & American Society for Testing and Materials

 

[Cysco]

I’ve seen countless airstreams on the road that are highly polished. It’s cool for a vintage trailer. For a CT? Man, I don’t know. To each there own, just remember, that “mod” is likely permanent. When the day comes to get rid of your CT many a buyer might see what you did as ruining it.

 

[Newton]

I’ve seen countless airstreams on the road that are highly polished. It’s cool for a vintage trailer. For a CT? Man, I don’t know. To each there own, just remember, that “mod” is likely permanent. When the day comes to get rid of your CT many a buyer might see what you did as ruining it.

I mean if u spend cash, or hours polishing it. You can always spend cash or hours unpolishing(sanding) it.

 

[fritter63]

I like matte.

 

[Gvardaman]

Engine turn the entire truck!!!

that would be really amazing!
Unfortunately,probably also exorbitantly expensive, due to the time involved.

 

[JohnnyWeb]

okay. well,

if these are allowed on the road I don't see why the cybertruck would be any different

I've been blinded by far more windshield. They might pull you over but not for the mirror finish.

 

[GnarlyDudeLive]

okay. well,

if these are allowed on the road I don't see why the cybertruck would be any different

The issue with the Cybertruck would be that it's surfaces are near flat. My HD VROD has mirror polished body tins (fenders and tank) and they do not pose reflective issues because the surfaces are curved and thus defuse the light. The instrument cluster housing on my VROD was also polished to a mirror as well and though it only had less than a 1/2 inch flat ring around the top, it would flash me in the eyes every so often. I ended up powder coating the housing not long after and problem solved. The tanker above also would defuse the light so you really would never get a laser beam blast from it.

 

[ldjessee]

The issue with the Cybertruck would be that it's surfaces are near flat. My HD VROD has mirror polished body tins (fenders and tank) and they do not pose reflective issues because the surfaces are curved and thus defuse the light. The instrument cluster housing on my VROD was also polished to a mirror as well and though it only had less than a 1/2 inch flat ring around the top, it would flash me in the eyes every so often. I ended up powder coating the housing not long after and problem solved. The tanker above also would defuse the light so you really would never get a laser beam blast from it.

Yeah, I am not a fan of chrome where it will reflect into my face on my bike either... I covered it with a tank bag and eventually just let it get dirty and didn't clean it and problem solved...

 

[5UBV3T]

Anyone here good enough with photoshop to come up with a polished render?

Seriously considering polishing it to a mirror finish..

Makes me think of all those fancy chrome wrapped cars I see downtown.

I'm already figuring in a vinyl wrap. I personally hate chrome. Shiny takes work cuz it never stays shiny! I'll probably wait to see what the SS looks like after a year and then wrap it in a matte color. I love the "concrete" color that Toyota used on their TRD Pros.