Width of the vault?

[OneLapper]

Did anyone see or hear mention of the width of the vault? The Yamaha Raptor is 46" wide, and it was stated somewhere that a 48" sheet of plywood will slide in.

From pictures with the ATV in the vault, it looks like it might be at least 56" wide.

Any guess would be appreciated!

 

[VolklKatana]

Well, the ATV is based on the yamaha raptor 700 atv, which is 45" wide.

Based on these pictures...
https://www.motor1.com/photo/4527552/winner-3-atv-manufacturers/
https://www.motor1.com/photo/4527365/tesla-cybertruck-and-atv/

Id say there is about 8-12" to the left of the left tire, and no more than 4-6" clearance for the right.

So that puts it between 57" and 63". We know the CTis destined to be 82" wide based on Elons tweets. so that means 10" each side between the inner bed wall and the outside of the fender, which again, based on the pictures, looks close.

My guess is 62"

 

[OneLapper]

Thanks, I agree it seems to be 60" or more. I'm sure it'll be years before we know for certain, but I can day dream about all the things that can fit in the vault. While I sit here. Bored.

 

[VolklKatana]

Hopefully less than that....Im still holding out hope for the middle end of 2021.