xtreembob
Member
What Elon thinks is best is where I'm at
From what I understand, the standard sized for a garage in the U.S. is 240," so it would be in the best interest of the customers and the manufacturer's to build a vehicle that will fit into a standard sized garage. The customers get a vehicle that meets their needs and the manufacturer sells what the customers want; win - win situation.I’m one of the people with a garage that is exactly 232” so a 7” shrinkage means the difference between parking inside, or knocking out a wall to expand the garage, or parking outside.
My little Ranger lives outside, but things get a lot more complicated when I’m trying to install a charger outdoors and also keep a battery warm in the winter.
You are right about standard size, but somebody else brought up in another thread that 240” is outside dimension, and many are closer to 230” because of wall thickness. Hence the need for a slight shrinkage...From what I understand, the standard sized for a garage in the U.S. is 240," so it would be in the best interest of the customers and the manufacturer's to build a vehicle that will fit into a standard sized garage. The customers get a vehicle that meets their needs and the manufacturer sells what the customers want; win - win situation.
Yeah, I've got a Gen 1 Tundra that's 216" long and it's a pretty tight fit. I checked the fit with the original Cybertruck length of 231" and it would BARELY be workable, so losing about 6" in length will definitely help! I just hope they leave the bed/vault length at 6.5'!You are right about standard size, but somebody else brought up in another thread that 240” is outside dimension, and many are closer to 230” because of wall thickness. Hence the need for a slight shrinkage...
My garage is pretty much exactly 240" door to wall. But there is a safety post (to prevent vehicles from hitting the furnace and water heater) planted right at about 232". If the truck is indeed 225" then it will allow me to keep the post in place. If not I will have to cut it off and hope nobody crashes into the furnace and water heater.You are right about standard size, but somebody else brought up in another thread that 240” is outside dimension, and many are closer to 230” because of wall thickness. Hence the need for a slight shrinkage...