Cybertruck confirmed specs / features list

[initintel]

I know the vault length is said to be 6.5 feet. I’m guessing that’s with the bed door down. Any idea what the length would be with the door closed?

Also, given the reduction in size recently announced, do we anticipate this changing the bed size dramatically?

Advertisement

 

[PACEMD]

Modern short bed trucks have a bed length of 6.5'..............8' with the tailgate down. Pretty sure that's the specs of the Cybertruck. There was a tweet that the overall size might be reduced by 3% without loss of function. The bed is function. Shortening the bed would not be a thing well received and apparently which Musk has said would not happen.

 

[Ehninger1212]

I know the vault length is said to be 6.5 feet. I’m guessing that’s with the bed door down. Any idea what the length would be with the door closed?

Also, given the reduction in size recently announced, do we anticipate this changing the bed size dramatically?

That should be with the tailgate up. should be 8' with the Tailgate down. It would be extremely misleading for Tesla to give that dimension with the Tailgate down, thats not the norm.

 

[Ehninger1212]

Modern short bed trucks have a bed length of 6.5'..............8' with the tailgate down. Pretty sure that's the specs of the Cybertruck. There was a tweet that the overall size might be reduced by 3% without loss of function. The bed is function. Shortening the bed would not be a thing well received and apparently which Musk has said would not happen.

Sure you can get them, most people seem to buy the 1/2 ton trucks with the 5.5' bed. Which is why Tesla is shooting for the CT to have a smaller footprint with a 1ft longer bed. Smaller Truck more usable space.

 

[hridge2020]

(Copied from TMC)
There seems to be a lot of guesswork over the design and capabilities of the Cybertruck against what was actually stated, so I’ve created this list from the transcript of the presentation, along with any relevant tweets from Musk. After all, even Neil deGrasse Tyson got it wrong when he claimed the Cybertruck was much heavier than the F150.

Here is the link for the transcript:

Tesla Cybertruck Event Transcript: Elon Musk Unveils Cybertruck - Rev

Feel free to list additional info or corrections as they become available.

Chassis/frame:

• same dimensions, same weight [as F150, 4000-5600 lbs]
• moved the mass to the outside [exoskeleton]
• stressed skin design
• skin [made] out of thick, ultra hard stainless steel
• won’t scratch. It doesn’t dent
• ultra hard, cold rolled stainless steel alloy that we’ve developed
• going to be using the same alloy in the Starship rocket and in the Cybertruck
• transparent metal glass (Tesla armored glass)
• aerodynamic - possible cd of .30 (source: tweet)

Suspension

• adaptive air suspension (standard)
• ability to adjust the ride height...so you can be efficient on the highway and you can also go off-roading
• highest clearance of any production truck (16 inch clearance)
• adaptive damping and adaptive ride height
• best angular approach angle
• best departure angle

Cybertruck Vault:

• a hundred cubic feet
• six and a half foot bed length
• up to 3,500 pounds of payload

Charging:

• access to all the superchargers
• capable of more than 250 kilowatts [charging rate]

Performance/range:

• Single motor rwd: 0-60 6.5 sec, top speed 110 mph, 250+ miles range
• Dual motor awd: 0-60 4.5 sec, top speed 120 mph, 300+ miles range
• Tri motor awd: 0-60 2.9 sec, top speed 130 mph, 500+ miles range

Features:

• onboard outlets for 110 and 220 volts
• onboard air compressor
• autopilot standard
• [accessory] ATV
• load mode (drop real low and go high on the other side)
• built-in ramp
• ATV plug[s in and charges in the bed]

What is the specification for Stainless Steel Mill Finishes type for the Cold Rolled? Per DIN and ASTM?

 

[Ehninger1212]

What is the specification for Stainless Steel Mill Finishes type for the Cold Rolled? Per DIN and ASTM?

I have searched around for this but i keep coming up empty. im sure it exist somewhere however i bet the Cybertruck will have different standards.

 

[MEDICALJMP]

Going for either the raw steel or a military-style colour option for nostalgia's sake - will one be able to paint the cold-rolled steel?

Musk said wrapping the vehicle was the option for color changes. A great idea as you could change easily.

 

[Jhodgesatmb]

I was playing with the CT designer and I know it isn’t perfect but I don’t see how the windows can retract into the door. Has anyone looked at this?

 

[Monroviabarber]

With the truck reducing length by 3 percent that should put the tundra by Toyota at a longer dimension correct . I don’t think many people keep their trucks in their garage I’m not a big fan of reducing the size .

 

[Papihavana]

As long as they aren't crazy on the size - Probably around the $1k, $1.5 k for a set.

Is that a set of 2 or 4

 

[TyPope]

With the truck reducing length by 3 percent that should put the tundra by Toyota at a longer dimension correct . I don’t think many people keep their trucks in their garage I’m not a big fan of reducing the size .

Elon said they weren't going to reduce the size. I'm one of those people who parked their truck in my garage.

 

[Herb Blair]

Bed -
W: 57 inches
L: 6.5 ft
H(lowest): ?
H(highest): ?

highest and lowest should be measured under the vault (closed)

 

[Jhodgesatmb]

Elon said they weren't going to reduce the size. I'm one of those people who parked their truck in my garage.

Right. He reneged on that at least a month ago after talking with the chief designer; said the CT would remain the size of the prototype. I wonder why no one has been able to get those bed heights (inside the tonneau of course). At the Petersen they could have eyeballed it within an inch I bet.

 

[Frank W]

But the vault was closed so I think it would be difficult?

 

[Jhodgesatmb]

But the vault was closed so I think it would be difficult?

oh, I did not know, but if you are right it could still be eyeballed. I saw people with measuring tapes in some of the videos. The best they could do on any measurement would have been guesses, but guesses are better than nothing.